Aluminum linear facade AMTT is the best solution for facing new facades and renovating old one ( manufacturing, warehousing, logistics and industrial complexes). The AMTT Linear Façade System consists of 84 mm wide roll formed, round edged panels, which can simply be clicked on the prongs of a 84R stringer to form horizontal or vertical lines. The stove enameled aluminum panels are recyclable, lightweight and strong.

The panels are made to measure and can be supplied in any length from 800 up to 6000 mm (other lengths are available on request). Panels can be joined by using the panel splice or by means of panel overlap. Between the panels there is an open joint. Depending on the type of stringer used, these joints can be filled with a reversed panel or join profile to form a closed façade appearance. The join profiles or reversed panels can be simply inserted or slide into the open joint by hand, without using any tools. The stringer is black, made of 0.95 mm thick stove enameled aluminum and is provided with prongs to accommodate the panels. Different modules are available (see system overview). Stringers have a standard length of 5000 mm.

The advantages of an Linear Façade
• high weather resistance
• different systems - 150mm, 200mm, 300mm
• combination of different types of panels
• ability to work without restrictions on length
• a small specific gravity
• wide range of colors
• combustibility G1
• 30 years warranty

Technical characteristics of the aluminum panels

• Length - on demand
• Width - 150, 200, 300 mm.
• Thickness - 0.6 / 0.7 / 0.8 mm.
• The thickness of the coating -28- micron